EB - Serial Bluetooth 4.0 LE

$29.10

  • Model: EB0500110M
  • Shipping Weight: 5gram
  • 9972 Units in Stock

Add to Cart:



 

Electronic Brick - Serial Bluetooth 4.0 is a wireless communication module.It can be used to exchange data over short distances between devices.Compare to  EB - Bluetooth 2.0, it's faster.

 

Features

 

  •  Rated Voltage: 5V

  •  Data rate:24Mbit/s
  •  High speed
  •  Low power consumption
  •  With Makerduino Demo Code
  •  Weight: 5g

 

Applications

 

  •   Wireless control

 

Details

 

    aeProduct.getSubject()

Use with Makerduino

 

The following steps show how to use EB - Serial Bluetooth 4.0 with Makerduino.

Materials

 

  •  Makerduino

  •  Electronic Brick Shield
  •  EB - Serial Bluetooth 4.0
  •  A/B type USB cable
  •  Female DuPont wires

Steps

 

1. Connect Electronic Brick Shield onto Makerduino to bring out all the Makerduino Pins.

aeProduct.getSubject()

 

2. Connect EB - Serial Bluetooth 4.0 to Makerduino as following:

 

aeProduct.getSubject()

3. Connect the Makerduino to Computer by the USB cable.

 

4. Download the Makerduino demo code EB - Serial Bluetooth 4.0.zip. Unzip the code directly into the libraries folder.

 

5. Open Makerduino IDE, choose the right Board and Serial Port. Open the sketch EB_SerialBluetooth_4_0.ino and upload it to the Makerduino.

 

 

6. Check the Results. After the sketch is successfully uploaded, let's open the Serial Monitor. Use you mobile phone transmit messages to EB - Serial Bluetooth 4.0. The monitor displays received information from EB - Serial Bluetooth 4.0 module.

 

Download information

 

Codes:

https://drive.google.com/folderview?id=0BzxrU4QvH7jEd3ZJTVdnNUpXNVE&usp=sharing#list

Documents:

https://drive.google.com/folderview?id=0BzxrU4QvH7jEbnlMVm94R2RoeW8&usp=sharing#list

Electronic Brick - Serial Bluetooth 4.0 is a wireless communication module.It can be used to exchange data over short distances between devices.Compare to  EB - Bluetooth 2.0, it's faster.

 

Features

  •  Rated Voltage: 5V
  •  Data rate:24Mbit/s
  •  High speed
  •  Low power consumption
  •  With Makerduino Demo Code
  •  Weight: 5g

 

Applications

  •   Wireless control

 

Details

    aeProduct.getSubject()

Use with Makerduino

The following steps show how to use EB - Serial Bluetooth 4.0 with Makerduino.

Materials

  •  Makerduino
  •  Electronic Brick Shield
  •  EB - Serial Bluetooth 4.0
  •  A/B type USB cable
  •  Female DuPont wires

Steps

1. Connect Electronic Brick Shield onto Makerduino to bring out all the Makerduino Pins.

aeProduct.getSubject()

 

2. Connect EB - Serial Bluetooth 4.0 to Makerduino as following:

 

aeProduct.getSubject()

3. Connect the Makerduino to Computer by the USB cable.

 

4. Download the Makerduino demo code EB - Serial Bluetooth 4.0.zip. Unzip the code directly into the libraries folder.

 

5. Open Makerduino IDE, choose the right Board and Serial Port. Open the sketch EB_SerialBluetooth_4_0.ino and upload it to the Makerduino.

 

 

6. Check the Results. After the sketch is successfully uploaded, let's open the Serial Monitor. Use you mobile phone transmit messages to EB - Serial Bluetooth 4.0. The monitor displays received information from EB - Serial Bluetooth 4.0 module.

 

Download information

Codes:

https://drive.google.com/folderview?id=0BzxrU4QvH7jEd3ZJTVdnNUpXNVE&usp=sharing#list

Documents:

https://drive.google.com/folderview?id=0BzxrU4QvH7jEbnlMVm94R2RoeW8&usp=sharing#list

 

 

 

About Us 1 Arduino Kits

This product was added to our catalog on Tuesday 11 February, 2014.

Your IP Address is: 54.156.92.46
Copyright © 2017 Maker Studio